Warning: The NVIDIA Jetson (AGX Xavier / Xavier NX) [Tablet] is no longer maintained.
A build guide is available for developers that would like to make private builds, or even restart official support.
Guides
Build download location
- Odd Solutions builds for this device don’t exist, I’m hosting this as a favor to webgeek1234. Builds for this device will live here, the instructions are still valid.
Special boot modes
-
Recovery: The bootloader does not allow using hardware buttons to boot to recovery. After apx flash, the device will boot directly to recovery. After installing Lineage, normal methods can be used to reboot to recovery.
-
Bootloader/Fastboot/Download: For AGX Xavier Devkit - With the device off, press the FRC REC button, then tap POWER. Release FRC REC once apx enumerates. For Xavier NX Devkit - With the device unplugged, jump the FRC REC pin, then plug in. Remove the jumper once apx enumerates.
Note: This page is auto-generated for the NVIDIA Jetson (AGX Xavier / Xavier NX) [Tablet], based on the device’s information,
located here.
You can find similar instructions for every officially-supported device on this wiki.
