Install LineageOS on dopinder

keyboard_arrow_left Back to the overview

Basic requirements

  1. Read through the instructions at least once before actually following them, so as to avoid any problems due to any missed steps!
  2. Make sure your computer has adb and fastboot. Setup instructions can be found here.
  3. Enable USB debugging on your device.

Unlocking the bootloader

  1. Enable OEM unlock in the Developer options under device Settings, if present.

  2. Connect the device to your PC via USB.
  3. On the computer, open a command prompt (on Windows) or terminal (on Linux or macOS) window, and type:
    adb reboot bootloader
    

    You can also boot into fastboot mode via a key combination:

    • Run adb reboot bootloader.
  4. Once the device is in fastboot mode, verify your PC finds it by typing:
    fastboot devices
    

    If you don’t get any output or an error:

    • on Windows: make sure the device appears in the device manager without a triangle. Try other drivers until the command above works!
    • on Linux or macOS: If you see no permissions fastboot try running fastboot as root. When the output is empty, check your USB cable and port!
  5. Now type the following command to unlock the bootloader:

    fastboot oem 'setenv lock 10101000;save' && fastboot reboot bootloader && fastboot flashing unlock
    
  6. If the device doesn’t automatically reboot, reboot it. It should now be unlocked.
  7. Since the device resets completely, you will need to re-enable USB debugging to continue.

Flashing the dtb and dtbo partitions

  1. Download dtb and dtbo files from here
  2. Reboot the device into bootloader mode:
    • Run adb reboot bootloader.
  3. Flash the downloaded image files to your device by running (replace <dtb> and <dtbo> with the actual filenames!):
     fastboot flash dtb <dtb>.img
     fastboot flash dtbo <dtbo>.img
    

Installing a custom recovery using fastboot

  1. Download Lineage Recovery. Simply download the latest recovery file, named something like lineage-19.1-20220920-recovery-dopinder.img.
  2. Connect your device to your PC via USB.
  3. On the computer, open a command prompt (on Windows) or terminal (on Linux or macOS) window, and type:
    adb reboot bootloader
    

    You can also boot into fastboot mode via a key combination:

    • Run adb reboot bootloader.
  4. Once the device is in fastboot mode, verify your PC finds it by typing:
    fastboot devices
    

    If you don’t get any output or an error:

    • on Windows: make sure the device appears in the device manager without a triangle. Try other drivers until the command above works!
    • on Linux or macOS: If you see no permissions fastboot try running fastboot as root. When the output is empty, check your USB cable and port!
  5. Flash recovery onto your device (replace <recovery_filename> with the actual filename!):
    fastboot flash recovery <recovery_filename>.img
    
  6. Now reboot into recovery to verify the installation.
    • Type the command:
      fastboot reboot-recovery
      

Installing LineageOS from recovery

  1. Download the LineageOS installation package that you would like to install or build the package yourself.
  2. If you are not in recovery, reboot into recovery:
    • Run adb reboot recovery.
  3. Now tap Factory Reset, then Format data / factory reset and continue with the formatting process. This will remove encryption and delete all files stored in the internal storage, as well as format your cache partition (if you have one).
  4. Return to the main menu.
  5. Sideload the LineageOS .zip package:
    • On the device, select “Apply Update”, then “Apply from ADB” to begin sideload.
    • On the host machine, sideload the package using: adb sideload filename.zip.
  6. (Optionally): If you want to install any add-ons, repeat the sideload steps above for those packages in sequence.

  7. Once you have installed everything successfully, click the back arrow in the top left of the screen, then “Reboot system now”.