Info about deadpool | Odd Solutions Wiki

Note: This page is auto-generated for the Google ADT-3, based on the device’s information, located here. You can find similar instructions for every officially-supported device on this wiki.

Get LineageOS for the Google ADT-3

Get the builds here

Guides

Installation
Build for yourself
Update to a newer build of the same LineageOS version

Special boot modes

Recovery: With the device unplugged, plug in the device while holding the Side Button until Recovery is displayed.
Bootloader/Fastboot/Download: With the device unplugged, plug in the device while holding the Side Button until Recovery is displayed. Now, click the Side Button to highlight “Advanced”, then long press the Side Button to select it. Then click the Side Button to select “Reboot Bootloader”, then long press the Side Button to select it.

Google ADT-3 (deadpool)

Released	September 22, 2020
Specifications
SoC	Amlogic S905y2
RAM	2 GB
CPU	Quad-core Cortex-A53 1.8 GHz
Architecture	CPU: arm64 Android: arm
GPU	Mali-G31 MP2
Network
Storage	8 GB
Bluetooth	4.2 + LE
Wi-Fi	802.11 a/b/g/n/ac
Dimensions	15 mm (0.59 in) (h) 69 mm (2.72 in) (w) 69 mm (2.72 in) (d)
LineageOS info
Maintainers	npjohnson stricted webgeek1234 deadman96385 trautamaki luca020400 aleasto
Supported versions	18.1